Air is free – compressed air can be expensive!
GET YOUR ENERGY COSTS UNDER CONTROL
Compressed air systems often receive little attention in terms of energy efficiency, or do you know how old your compressed air generators are and what equipment they have?
Compressed air is one of the safest, but one of the most expensive forms of energy in companies. Due to leaks in valves, control air hoses, sealing air and piping, the energy often escapes completely unused. Further energy ist lost trough unused heat generated during the production of compressed air. Compressed air generators that matched your consumption years ago are operating inefficiently with your current compressed air consumption, resulting in high energy costs.
Are you tired of giving money away? High energy costs and hidden energy guzzlers are a constant issue in your company?
THEN YOU HAVE COME TO THE RIGHT PLACE!
We bring compressed air to the point! In less than 90 seconds we show you what is important for your compressed air supply.
Because every bar of extra pressure means 10% higher energy costs for you. How you can avoid this?
THAT’S WHERE WE SUPPORT YOU!
We check your complete system and eliminate weak points. With our help, more than 1000 companies already save energy every day and increase the service life of their system.
NEED TO KNOW? It’s worth taking a look.
THINKING FLEXIBLY INSTEAD OF SWIMMING WITH THE CURRENT, TACKLING INSTEAD OF TALKING!
These are the strengths of FILCOM GmbH. In the field of compressed air, FILCOM GmbH has been a reliable partner for companies in Baden-Württemberg for over 20 years for maintenance and repair work on well-known compressor brands and complex compressed air systems. The company is certified according to DIN EN ISO 9001:2015. Together with you, we create feasible steps for smart energy planning at the end customer.
NO MORE GRAY THEORY! FILCOM CONVINCES!
We support you with our knowledge from over 20 years of experience in compressed air technology. With FILCOM GmbH you have an expert at your side , who supports you in all relevant areas. We call this “360-degree know-how” – from which you can benefit as an energy consultant.
ENERGY EFFICIENCY COACHING IN COOPERATION WITH SEMPACT AG
Energy has always been the number 1 issue to be solved since time immemorial. It is very important that energy is continuously available and affordable for companies and private households. In this interview with Antonia Meichelböck, energy efficiency coach at SEMPACT AG, we look at challenges faced by companies. The drastic increases in the prices of energy sources such as heating oil, gas, electricity and coal are currently making it difficult for all companies to feed in their energy costs and pass them on to the consumer – a challenge.
Energy is required to compress air. Energy costs account for up to 70 % of the total life cycle cost of a compressor. Improving the energy efficiency of a compressed air system can save your money.
DO YOU KNOW YOUR MINIMUM DEMAND PRESSURE?
Your minimum demand presure is the pressure at which, even if several consumers are switched on at the same time, no failures occur on the machines (due to pressure undershoots). Energy consumption can be effectively reduced if the pressure is reduced.
In an industrial compressed air system, air demand is typically subject to fluctuations. One step towards optimizing energy efficiency is to reduce idle times.
Up to 25 % of total compressed air consumption can be lost in older compressed air systems due to leakage.
Air contains a base level of energy at atmospheric pressure, which increases during the compression process. Approximately 94 % of the electrical energy is converted to heat of compression. If energy recovery is not used, the recovered heat is lost to the atmosphere via cooling systems and radiation.
You can make your plant more efficient by using a modern compressor control system or electric motors. In this way, the latest generation of SIGMA AIR MANAGER 4.0 actively supports energy saving.