Filcom Druckluft

BAFA FUNDING

Current subsidy increases to max. 50%.

Startseite Service Support programs
UP TO 50 % GOVERNMENT SUBSIDY.

IMPORTANT INFORMATION ABOUT CURRENT BAFA funding – VALID FROM 02/15/24!

Which companies can apply for funding in Module 1 and what is the funding rate?

  • Small companies (up to 50 employees) / funding rate: 25%
  • Medium-sized companies (up to 250 employees) / funding rate: 20%
  • Large companies – no funding possible!

ATTENTION: The amount of funding relates to the total investment costs and is carried out via Article 38 of the GBER and not via de minimis.

Which products are supported in Module 1?

  • Compressed air generator (only replacement of existing systems = replacement investment, no new investment)
  • Higher-level control (retrofitting)
  • Heat recovery (only retrofitting, no new investment); The prerequisite for funding is that the system has been in existence for at least five years

What other conditions must be taken into account when funding a compressed air generator (Module 1)?

Only the replacement of existing systems that are being used by the applicant company on its own premises and are fully functional at the time of the application will be funded. The systems must have been in the company’s inventory for at least five years. A photo of the existing system must be submitted when submitting the application. If the existing system is sold, the eligible costs are reduced by the amount of the sales proceeds.

Will refrigeration dryers continue to be funded in conjunction with an eligible compressor (Module 1)?

Only refrigeration dryers that use refrigerants with a Global Warming Potential (GWP) of less than 150 will be funded. This means that adsorption dryers can continue to be funded in conjunction with an eligible compressor. The Secotec, Kryosec or Hybritec refrigeration dryer series as well as compressors with an attached refrigeration dryer are no longer eligible for funding.

When can the eligible system be ordered?

The system may only be ordered after receipt of the funding notification. If the system is ordered beforehand, this will be detrimental to the funding.

How long is the period for the implementation of the measure?

The approval period is 36 months.

FOR COMPRESSORS FOR INDUSTRIAL APPLICATIONS

The successful “Federal Support for Energy Efficiency in Industry” (EEW) will be supplemented by new funding opportunities for resource efficiency and transformation concepts as of November 01,2021. In addition to an expansion of module 4 to include the funding element of resource efficiency, the funding program will also be supplemented by a fifth module – the funding of transformation concepts. In addition, measures for the off-site use of waste heat will be funded at a higher rate in the future and the funding cap for SMEs will be increased.

The German Federal Office of Economics and Export Control (BAFA) is extending the program until June 30, 2024 as part of the amendment, with an option until Dec. 31, 2026

BAFA funding for compressed air technology

01

Saving costs with state support

The BAFA guideline for investment subsidies for the use of highly efficient cross-sectional technologies has been extended.

According to the BAFA guidelines for investment subsidies for the use of highly efficient cross-sectional technologies, you can submit a BAFA subsidy application until June 30, 2024. If this is approved, up to 50% of the investment costs can be reimbursed by the state.

Take the opportunity now and replace your old unit with a new compressor and benefit from the government subsidy. The advantage is quite obvious: You protect the environment with a new compressed air system thanks to a new energy-efficient device. In addition, energy costs are permanently reduced by the use of a more energy-efficient device and you receive 50% of the costs back from the state through the investment subsidy.

02

Grant for efficient compressed air

From now on, subsidized measures under Module 4 are open to all technologies and are no longer technology-specific. The additional form “early start of measures” for the BAFA application for funding of cross-sectional technologies in module 1 is no longer required. You can therefore start implementing the planned measure – at your own financial risk – after BAFA has received the application or wait for the decision (notification of grant).

Up to 40 % of the funding is available for replacement or new purchases of compressed air systems (screw compressors and the KAESER i.Comp & 9 piston compressors) and retrofits of higher-level control systems, compressors with speed control, insulation of systems and systems of heat recovery. This includes initial investments in an ultrasonic measuring device for detecting leaks (leakage measuring device).

ATTENTION:

An application to BAFA is the prerequisite for subsidies. The order of your compressor is possible without problems after receipt of the grant notification (approx. 2 – 6 weeks).

03

Which technologies are subsidized by BAFA?

HIGH-EFFICIENCY COMPRESSORS

  • High-efficiency compressors with speed control
  • High-efficiency compressors without speed control, if the compressor is operated with low switching frequency and low idling percentage.
Learn more

SUPERORDINATE CONTROL FOR MULTIPLE COMPRESSORS

  • Retrofitting of a higher-level control system for several compressors to optimize the overall efficiency of the compressed air station according to demand
Learn more

ULTRASONIC METER

  • The initial investment in ultrasonic measuring devices to detect leaks (leakage mesuring device) in combination with a previously mentioned measure regarding efficient compressed air generation.

HEAT RECOVERY

  • Heat exchangers for heat recovery in compressed air generation systems
Learn more
04

What are the requirements for an application?

HIGH-EFFICIENCY COMPRESSORS

The pressure level must be in the range between 4 and 15 bar gauge. The compressor must have an efficiency in compressed air production, depending on the pressure level, in accordance with the average specific power value according to tables 2 and 3 (see leaflet Module 1 – Cross sectional technologies). The specific power value shall be determined according to the specifications of ISO 1217:2009 Annex C/E. Refrigeration dryers shall not be considered in the determination. For speed-controlled compressors, the specific power consumption is determined in relation to the best point.

Learn more

SUPERORDINATE CONTROL FOR MULTIPLE COMPRESSORS

In the case of several individual compressors delivering in parallel into the same consumer network, a higher-level control system must take over the operating mode of the individual compressors for the energy-optimized coverage of the compressed air demand (e.g. operation in a common pressure band).

ULTRASONIC METER

Funding is povided exclusively in combination without another funded measure in accordance with item 1.4. A maximum of one leakage device with net investment costs of a maximum of 500 euros is eligible for funding per applicant.

HEAT RECOVERY

The thermal recovery capacity must correspond to at least 70 % of the electrically absorbed power of the compressor in nominal operation.

INFO

Technologies that bring about structural changes in the economy as a whole, i.e. in many sectors of the economy and across many value chains, are so-called cross-cutting technologies. They are associated with significant productivity effects and exemplary energy efficiency, as is the case with eligible compressors.

BAFA cross-section technologies

Process flow

From the application to the payment of the BAFA subsidy

05

Characteristics and criteria

MODULE 1: HIGH-EFFICIENCY CROSS-SECTION TECHNOLOGIES

  • Anyone who wants to optimize, expand or replace their existing compressed air system or even invest in a completely new system can count on BAFA funding up to 200,000 euros (per location).
  • Compared to the funding of individual measures, in the systemic optimization not only the compressor but also the complete periphery such as refrigeration dryer, filter, compressed air tank, heat recovery and compressed air network including installation can be funded at 30 %. Small companies (up to 50 employees) and micro-enterprises (up to 10 employees) receive an additional bonus of 10% on top of the 40% subsidy that was previously possible. This means that a maximum subsidy of 50% is possible.
  • Medium-sized companies will continue to receive a maximum subsidy of 40%.
  • Larger companies (500 employees or more) now receive a 30% subsidy.
  • A maximum funding amount of 200,000 euros per project applies to this module.
  • Subsidized ancillary costs may not exceed 30% of the investment sum.
  • Based on a company-specific energy-saving concept by an energy consultant (BAFA approval), the replacement as well as the new acquisition of eligible cross-sectional technologies in the optimization of technical systems is subsidized.
  • In addition, measures can be funded that contribute to improving the energy efficiency of a cross-sectional technology, taking into account the system connection.
  • A prerequisite for the subsidy is that at least one new compressor is also purchased in the system as part of the improvement in overall energy efficiency.
  • Only investments with a net investment volume at least 2,000 euros can benefit from the BAFA subsidy.
Learn more

MODULE 4: ENERGY-RELATED OPTIMIZATION OF PLANTS AND PROCESS

  • Investment measures for the energy optimization of industrial and commercial plants and processes to increase energy efficiency as well as for the use of heat from renewable energies and waste heat for commercial processes in companies are funded.
  • The subsidized measures are open to technology in this context (e.g. blowers). A qualified savings concept by an energy consultant (BAFA approval), by the company itself (DIN EN 50001) or EMAS – certified energy and environmental management system is the prerequisite for this. The energy saving must be proven, but no more than 25 % is required.
  • Small companies (up to 50 employees) and micro-enterprises (up to 10 employees) receive an additional bonus of 10% on top of the 40% subsidy previously possible. This means that a maximum subsidy of 50% is possible. The investment grant in module 4 is based on the CO2 savings. From now on, this amounts to a maximum of 1200 euros per ton of CO2 saved per year for small and micro enterprises.
  • For medium-sized companies, the investment subsidy is max. 40 %. Max. 900 euros per ton of CO 2 saved per year. Amount of ancillary costs is not capped. Maximum subsidy amount is 10 million euros per project.
  • Larger companies (500 employees or more) now receive a 30% subsidy. The investment grant amounts to a maximum of 500 euros per ton of CO2 saved per year.
  • A maximum investment grant of 15 million euros per project applies to this module.
Learn more
06

Which proofs have to be provided?

The following evidence must be provided in order to apply for funding:

  • Proof of the best point for speed-controlled compressors is provided by the manufacturer.
  • Proof of heat recovery must be provided by means of a calculation by an expert or manufacturer based on the product data sheets of the heat exchanger and compressor.
  • The proof of the superordinate control

INFO

Companies that have a business registration or are entered in the Commercial Register or the Handicrafts Register are eligible to apply and receive a grant. These include private companies, municiple companies, freelancers if the business premises are predominantly used for freelance acitivies, and contractors who carry out the measures mentioned in this direction for an eligible company with a business premises or branch in Germany.

07

What are the funding limits for individual measures?

The following funding limits have ben set for individual meaures:

  • Investments with a net investment volume of at least 2,000 euros, including the directly related ancillary costs for planning and installation, are eligible and thus eligible for a grant.
  • Funding is limited to a maximum of 200,000 euros. The sum of all individual measures at a site is considered a project.
  • The amount of funding for ancillary costs corresponds to a a maximum of 30 % of the investment costs.

Downloads

Do you need more comprehensive information?

BAFA application form Overview BAFA cross-sectional technologies Module explanation, leaflets and information sheets To the filling aid Summary BAFA support program 2021

Your contact persons

Do you need advice or support? The team of FILCOM will be happy to assist you in applying for your subsidies for compressors as well as for screw compressors.

OUR BUSINESS HOURS

Monday to Friday

08:00 a.m. to 12:00 a.m. / 01:00 p.m. to 05:00 p.m.

Request now!

FAQ

FREQUENTLY ASKED QUESTIONS ABOUT BAFA SUPPORT FOR COMPRESSORS

Here you will find answers to your questions

Answer

Module 1 includes the following products:

  • Screw compressor (standard system, frequency controlled system, system with attached dryer or stationary systems / complete systems)
  • Superordinate control system
  • Heat recovery (the thermal recovery capacity must correspond to at leat 70 % of the electrically absorbed power of the compressor in nominal operation)
Answer
  • If 2 compressors are required to cover the compressed air demand, then 2 compressors can also be promoted.
Answer
  • The dryer as a single unit is NOT eligible, but if the customer buys a screw compressor with matching refrigeration dryer (eligibility of the compressor according to table 4 provided) the matching dryer in combination with the compressor is eligible, but the specific capacity is consideered only from the compressor – the same applies to T-systems and combination dryers, such as the HYBRITEC.
Answer
  • The higher-level control system for compressed air generation is regarded as an independent cross-sectional technology and is therefore eligible for funding in both cases.
  • A higher-level control is even eligible without investment in compressed air generators, as a higher-level control for existing compressors.
Answer
  • No, because complete systems are eligbile as a whole.
  • Treatment components are only eligible in module 4.
Answer
  • No, it is not eligible in Module 1, but it is eligible in Module 4.
Answer
  • With the start of the new directive on 01.01.2019, not only an investment grant (BAFA) but also a “loan” is possible (KFW). This is a repayment grant.
  • For more information, please contact:
https://www.kfw.de/kfw.de-2.html
Answer
  • As of now, the additional form “early start of measures” is no longer required for the BAFA application for funding of cross-sectional technologies in module 1. You can therefore start implementing the planned measure – at your own financial risk- after BAFA has received it or wait for the decision (notification of funding) on the application.
Answer
  • The specialist contractor declaration is part of the proof of use procedure.
  • The specialist contractor declaration must be completed and signed by the installer (e.g. subcontractor). If two or more installers have been commissioned, the specialist contractor declaration must be completed by a copy of each of the installers. The specialist contractor confirms the accuracy of the information in the invoice claimed by the company regarding the cross-section technologies installed by him.
Answer
  • The 2018 application can only be cancelled if a legally binding order has not yet been placed. If this is the case, the customer must cancel the application with BAFA.
  • If the order for the system has already been placed, the application may not be cancelled. Should this nevertheless happen, BAFA may take legal action.
Answer
  • The copies of the invoices must show the net investment costs of the cross-sectional technology(ies) (e.g. single measure screw compressor).
  • The installation and planning costs (net) must be shown separately.
  • The labor costs must be shown separately from the material costs.
Answer
  • Planning and installation costs are eligible for a maximum of 30 %, but may not exceed a share of 30 % of the net investment sum. In this case, 30 % of the net investment sum is subsidized.
  • Eligible installation costs include, in particular, the expenses for setting up, assembling and connecting to existing systeems to produce an operational system.
  • The expenditure must be directly related to the energy efficiency measure (e.g. individual screw compressor measure).
  • Planning and installation services must be carried out by external third parties to be eligible for funding. Own work by the applicant is not eligible; an exception to this rule exists for energy service companies.
Answer
  • Confirmation that the technical system has been used in accordance with the application and is ready for operation.
  • By means of electronic proof of use form as well as
  • Specialist contractor declaration, which must be completed and signed by the responsible installer.
  • Proof of expenditure of the installed investment as well as planning and installation by means of invoices to be uploaded. The actually realized expenses without VAT (if entitled to deduct input tax), including discounts (even if these were not claimed) and rebates must be submitted.
  • In addition, a tabular voucher list must be attached in which the expenses are listed separately by type and in chronological order. This voucher list must show the date, recipient, reason and individual amount of each payment.
  • Declaration by the applicant on the non-utilization of other public funds to support the measure.
  • In the case of funding in accordance with 5.4, confirmation by a qualified energy consultant or the responsible in-house expert (if the applicant company has an energy or environmental management system certified in accordance with DIN EN ISO 50001 or EMAS) of the proper implementation of the savings concept is also required.
  • Confirmation of the truthful information